Skype Us! HACKER SAFE certified sites prevent over 99.9% of hacker crime.

 Home » Xtreme Revolution » Categories » Body » Fairings Share 
 
 Your ZipCode? Your wishlist contains 0 items Your cart contains 0 items ($0.00

Xtreme Revolution VTX UltraFairing  

 Email this product to a friend
Xtreme Revolution VTX UltraFairing

This fairing is designed specifically for the Honda VTX. It is not a generic "fits all bikes" fairing -- it is just for the VTX. The shape of the fairing blends the classic "batwing" fairing design with the beautiful shape of the VTX headlight. The UltraFairing completly encloses the headlight and closely follows the leading edge so that the unmistakable character of the VTX is not masked and your headlight does not end up looking like a round peg in a square hole. This high-quality fairing is made in America with the finest crafstmanship and fits both the VTX1300 and the VTX1800 C,R,S,N,T models.

  • Un-matched styling for the VTX!
  • Serious wind protection & comfort!
  • Aerodynamic - improves MPG!
  • Killer tunes = more fun!
  • Easy to install!
  • Very affordable!

The matching inner dashboard is designed to accept a standard automotive stereo receiver and four 5 1/4" speakers.  You can purchase the fairing with a stereo or you can install your own stereo. The mounting holes are already cut out and installing a new receiver and some speakers into the dashboard is a simple task.

You can choose between a complete inner and outer fairing package or you can purchase the outer fairing alone if you are not interested in the stereo.

The VTX UltraFairing is compatable with any windshield made for an 96-05 FLHT/FLHTC Harley Davidson. The fairing is sold without a windshield but they are readily available from any motorcycle parts dealer.

We manufacture the fairing in two different materials so you can choose between durability and cost. The hand-laid fiberglass version is practically indestructable and built to last a lifetime. The impact resistant plastic version is not quite as tough but looks and performs exactly the same and is the right choice if you want to keep the cost down.

Material Outer Fairing Only Inner-Outer Base 
Plastic na $499
Fiberglass $499 $799

Weight (without stereo)

Outer Fairing Only Package
Plastic na 11lbs
Fiberglass 9lbs 14lbs

The fairing is attached with steel brackets that attach directly to the triple trees at existing mount points so no drilling or clamping is required. If your VTX does not have covered forks then you can also use standard quick-release Memphis Shades mounting brackets. The quick-release brackets bolt directly to the inner dashboard and then attach to fork mounted clamps so that the entire fairing can be removed and reinstalled in just a few moments. Memphis Shades windshield brackets for the VTX1800 or VTX1300 are readily available from any motorcycle parts dealer.

Outer Fairing Features

  • Heavy-duty 1/4" thick construction -- strong and built to last!
  • Plenty of clearance for most aftermarket light bars (light bar must be mounted to the bottom of the lower triple tree and may require an offset spacer)
  • High speed stability and aerodynamics. Fully tested at VTX1800 top speed.
  • Compatable with a wide selection of aftermarket Harley Davidson style windshields.
Inner Dashboard Features
  • Heavy-duty construction.
  • Cutouts for standard automotive stereo receiver and four 5 1/4" speakers - you install your own equipment.
  • Compatable with Quick-release Memphis Shades brackets.


Notes:

*The VTX 1800F model headlight is different style and size than other VTX models and does not fit properly in the Ultra-Fairing.  The headlight can be replaced with a standard VTX1800C type headlight in order to use the Ultra-Fairing.

* The ultrafairing is compatable with most VTX lightbars. In the worst case, your lightbar may need to be lowered slightly to clear the fairing.

* Windshields that are designed to work with the Memphis Shades Batwing Fairing are not compatable with a Harley Daviidson fairing and do not work on the UltraFairing.


Xtreme Revolution VTX UltraFairing - Inner/Outer Package - Unpainted Plastic

Inner/Outer Package - Unpainted Plastic
SKU: XR-31P-Package      
   

Xtreme Price: $399.00
Complete inner and outer 2-piece plastic VTX Ultrafairing complete kit with a universal mounting kit and polished windshield trim. Windshield and stereo not included. 

Xtreme Revolution VTX UltraFairing - Inner/Outer Package - Unpainted Fiberglass

Inner/Outer Package - Unpainted Fiberglass
SKU: XR-31-Package      
   

Xtreme Price: $799.00
Complete inner and outer 2-piece fiberglass UltraFairing with a universal VTX mounting kit and polished stainless steel windshield trim. Windshield and stereo not included.

Xtreme Revolution VTX UltraFairing - Outer Fairing - Unpainted Fiberglass

Outer Fairing - Unpainted Fiberglass
SKU: XR-31      
   

Xtreme Price: $499.00

Complete outer-only 1-piece fiberglass UltraFairing with a universal VTX mounting kit and polished stainless steel windshield trim. Windshield and stereo not included.  


Xtreme Revolution VTX UltraFairing - Stereo Option

Stereo Option
SKU: XR-31-Stereo      
   

Xtreme Price: $249.00

Our optional stereo system offers great features and great value with marine grade water-resistant components.

Included with this option is a Jenson MSR3007 AM/FM/Cd Sirius Satellite Ready Stereo which is designed and tested to work in even the harshest environments with conformal coated circuit boards and UV stable faceplates, grilles and housings:

  • New Generation of Jensen Marine family styling.
  • Solid top chassis
  • Graphite colored sealed faceplate
  • Dot matrix positive LCD display with blue backlight
  • Silicone rubber key pad
  • LED backlit controls
  • UV stable plastic
  • Conformal coated circuit boards
  • Zero Memory Current Draw
  • 160 Watts (4 x 40W)
  • 40 second CD Electronic Skip Protection (ESP)
  • Wired remote control capable (MWR100)
  • Front Aux input
  • Works with DLP2500 Sirius receiver, data cable and satellite antenna
  • Full iPodĀ® controls (adapter cable sold separately)

Also included are four Boss Audio MR50B 5.25 speakers:

  • Power Handling Peak:150 watt
  • Magnet Structure: 30oz
  • Impedance: 4 ohm
  • Frequency Response: 120Hz-18kHz
  • SPL 1 watt / 1 meter: 90db
  • Cone Material: poly injection
  • Voice Coil: 3/4" Aluminum
  • Tweeter:1' mylar dome

We also install a rubber whip antenna (hidden inside the fairing) and a quick disconnect electrical connector for the power supply.

NOTE: Due to the harsh ride on a Honda VTX, and the tilted orientation of the unit, there is a very good chance that the CD Player WILL SKIP. Please do not choose this stereo if you want to use only the CD player. In addition to being water-resistant, this unit is great for playing MP3's (through the front Aux-In jack), it works great with the optional Sirius module, it has a nice built in I-pod interface. it has a good AM/FM radio, but it is not good for listening to CD's.




Xtreme Revolution Bat-Glove for Batwing Fairings - $129.95

Fast Cycle Parts T-Shirt - $14.95
Xtreme Revolution Bat-Glove for Batwing Fairings - $129.95
Xtreme Revolution T-Shirt - $19.95
Xtreme Revolution Suzuki C90/C50 UltraFairing - $499.00

Ground Pounder Radiator Shroud for VTX1300C - $199.00
Xtreme Revolution Bat-Glove for Batwing Fairings - $129.95
Xtreme Revolution T-Shirt - $19.95

Product Rating: (4.62)   # of Ratings: (52) (Only registered customers can rate)

Ratings Breakdown for Xtreme Revolution VTX UltraFairing

5 - Great
4 - Good
3 - OK
2 - Bad
1 - Terrible
0% 50% 100%
 
Sort: Comments 1-10 of 32 (Next 10)
1. Ken on 7/6/2010, said:

just didn"t think I was kept informed on why it took so long for the product to be sent.
  (0 people found this comment helpful, 0 did not)
2. James on 6/5/2010, said:

Good sound. I ported the fairing and getting better bass sound that my brothers (has the same setup)
  (0 people found this comment helpful, 0 did not)
3. Michael on 4/23/2010, said:

Great product, but it needs a lot of prep to get it ready for paint......
  (0 people found this comment helpful, 0 did not)
4. Ron on 4/14/2010, said:

The (fiberglass) fairing looks good, when you finally get it installed. My painter needed 6 hours to prep it before he could paint it. Lots of pin holes and soft spots. Neither he nor I were impressed with the quality out of the mold. The mounting hardware is a cobbled-together collection of metal flat straps and angles from the hardware aisle at Home Depot (literally - they have the "Stanley" stamp on them). It works, but looks rather silly behind the fairing if you bother to look. More Rube Goldberg than I"d like. The seal around the windshield (loose plastic to plastic, no weatherstripping), and the top of the fairing directly above the speakers is VERY bad (approx. 1/8 inch gap). Not sure how to get even close to a weather tight seal, so there is going to be an issue keeping the sound system dry. Still not sure how to fix that. With several other fairings out there to choose from, I"d probably go elsewhere if I had to do it again.
  (1 people found this comment helpful, 0 did not)
5. Dennis on 3/19/2010, said:

The X.R. fairing rocks!!! the only thing is that I did not receive my windshild trim? Thank you Dennis
  (0 people found this comment helpful, 1 did not)
6. Chris on 3/17/2010, said:

Very good quality fiberglass! It"s in for painting at the moment, I do wish it had some sort of rubber gasket around the inner and outer shells to cover up some of the gaps. Also the mounting hardware is to nothing special.
  (1 people found this comment helpful, 0 did not)
7. Bill on 3/9/2010, said:

I was rather surprised at the number of chips and dinks in the fiberglass when I received the fairing. I figured that for the price I paid, it would have truely been "paint ready" as it is i am going to have to spend some time with body putty and sand paper to actually get the unit ready for paint. I was also surprised at the size of the gaps between the inner and outer halves of the fairing. I expected to see a much tighter fit... again, more body putty and sand paper. I sure hope that the pre-painted fairings don"t go out looking like this as well.
  (1 people found this comment helpful, 0 did not)
8. George on 2/21/2010, said:

My only complant is about the mold use for the front faring. I don"t like the seam were the two halves fit together. The seam I"m refering to is the one just abouve the top speaker. Why is it that it wasn"t designed to be more fitted and not so primative. I find it to be a design flaw. The forms group at VTXOA menbers seem to share the same issues. I only wish I did a bit more research before I chose the Extream Revolutions faring. I would like very much to hear from you. George
  (1 people found this comment helpful, 0 did not)
9. Marty on 12/25/2009, said:

This Fairing is great it was very easy to install and is very sturdy. I bought the outer and could not be happier with it the construction is top notch! Thanks to Rob and the Gang at Fast Cycle.
  (0 people found this comment helpful, 1 did not)
10. Ramon on 11/2/2009, said:

Awesome Fairing! Great customer service when I called to inquire with questions about the Fairing. Will buy again! Thanks!
  (1 people found this comment helpful, 1 did not)
Comments 1-10 of 32 (Next 10)


Casual
Womens
Body
Chassis
Controls
Electrical
Power
Storage
Gift Ideas



Product Search


Photo Galleries
Custom Chronicles
SSL